ALL MODELS NOW AVAILABLE WITH 2TB DRIVES

E4

  • 12 of 16 bay rack mount enclosure
  • Capacities to 32TB
  • Dual 4G FC host connection
  • Hardware acceleration for outstanding RAID 6 & 6 performance
  • Support for latest SAS and SATA II drives
  • Flexibility to use SAS & SATA-II drives in same enclosure
  • Support for RAID levels 0, 1, 0+1, 3, 5, 6 and JBOD
  • Adaptive cooling
  • Powerful 560W redundant PSU’s
  • Hot-swap SmartLCD panel (16 bay only)
  • Sophisticated configuration and monitoring
  • Caddies support 10K & 15K RPM hard drives
  • Multi-lane SAS expansion via JBOD enclosures allowing support for up to 128 HDDs
  • Supports Xsan 2 and Final Cut Studio 2
  • 2GB cache as standard for improved performance

 

 

The 12 or 16 bay E4 RAID system combines dual 4Gbit host connection, with high performance SAS and SATA-II drives. With the flexibility to combine SAS and SATA-II drives in a single enclosure, plus a multi-lane SAS connector for expandability, the E4 takes performance, reliability and scalability to a new high. Users can expand the storage capacity by adding additional 12 or 16-bay JBOD systems to a single E4 master box offering up to 256 TeraByte of storage in a fully loaded system.

 

The powerful E4 RAID engine utilises the new Intel Xscale IOP341 processor providing true hardware acceleration, with improved performance in RAID 5 and 6. In addition, E4 comes with a huge 2GB of cache as standard, offering exceptional performance in Data Streaming and also increases the cache hits in Random environments.

 

E4 supports MAID, making it one of the few products on the market that takes a stand against harmful greenhouse gases/CO2 emissions. In a RAID system, peak power consumption occurs when the drives are spinning - yet most RAID systems are only used from 09.00 to 17.00, 5 days a week and remain idle for the rest of the time. However, the E4 system detects any idle time and simply spins down the drives so they don't consume electricity until they are in use again. This process is totally automatic and occurs without any loss of connection between the Server and the E4 system. The E4 RAID controller also continues to respond in a completely normal way.

 

Fibrenetix E-series intelligent cooling system also adapts to the environment. If there is a limited need for cooling, the fans automatically run with a lower speed and thereby use less electricity.  Fibrenetix E4 is a formidable system.

Features

 
  • New high performance Intel IOP341 processor, with RAID-5 and RAID-6 hardware acceleration for outstanding performance levels
  • Supports high performance SAS / SATA-II hard drives, pushing transfer rates and reliability to a new benchmark
  • Optional multi-lane SAS connector for expandability and scalability - add JBOD storage to connect up to 128 HDDs
  • High-end enterprise E-Series caddy system offering the best protection of hard disks and data, designed to support 10K & 15K RPM hard drives
  • Flexibility to use SAS & SATA-II drives simultaneously in a single E4 enclosure
  • Powerful 560W redundant PSU’s - beat all competitive products offering sufficient power to support high performance HDDs and controller. With increased reliability and MTBF (mean time between failures) of critical components
  • Supports Xsan 2 and Final Cut Studio 2, offering better performance and reliability than any comparable storage offering
  • 2GB cache as standard, providing exceptional DATA STREAMING performance & improved RANDOM access
  • ‘Environmentally friendly’ E4 supports industry standard MAID technology (spinning down drives when not in use), considerably reducing power consumption
  • Intelligent cooling system which continuously adapts to environmental conditions by automatically controlling the speed of the fans for optimal cooling
  • Unique upgradeability offering true POI (protection of investment). All E-series products can be upgraded to the newest technology:
    E1 > E2 or E4 - via upgrade of backplane & controller
    E2 > E4 - via upgrade of controller only
  • Sophisticated monitoring and alert system enabling the system administrator to monitor and receive alerts via onboard Ethernet connection
  • Built-in management software supports any internet browser and alerts can be sent via POP3 emails, SNMP or network broadcasting, ALL without any installation of software or drivers
  • Unique hot-swap SmartLCD (16 bay only), push-button removal for added security and easy replacement
  • Compatible with major brands of video editing, capture and playback cards, devices and software.
  • Selectable RAID levels: JBOD, 0, 1, 0+1, 3, 5 plus RAID-6 for the ultimate protection of your valuable data

Specifications

RAID Architecture DAYTONA RAID ENGINE
RAID Controller Intel IOP341 XScale Processor
RAID Design Cableless Intelligent Backplane Integration
Max. Supported No. Drives

12 bay : 12 x SAS / SATA II HDDs

16 bay : 16 x SAS / SATA II HDDs

High Security RAID Level RAID-6
Other Supported RAID Levels JBOD, 0, 1, 0+1, 3 , 5, 10, 30, 50, 60
Memory Bus 2GB DDR2-533 SDRAM with ECC
Memory Type Industry Standard DDR ECC SDRAM
Memory 2 GB Standard
Host Bus Interface 4GBit Fibre Channel
Host Bus Channels 2 Channels
Disk Bus Interface 3Gbit SAS / 3Gbit Serial-ATA
Disk Bus Channels

12 bay : 12 Independent Channels

16 bay : 16 Independent Channels

Host Independent Yes
Operating Systems Supported Windows Server 2003, Windows 2000,
MSCS (Microsoft Cluster Server) Windows NT,
Windows XP-Pro, Windows Vista, Sun-Solaris, Linux, True64 Unix, HP-UX, IBM-AIX, SGI-IRIX, MAC-OS, Free BSD, Novell, plus any system with a standard SCSI interface.
HDD supported max. Capacity 2TB
Maximum Subsystem Capacity 32 TB in RAID-0 & JBOD
28 TB in RAID-6 (Max.security)
Drive Temperature Sensors Yes, One per Drive-Slot
Redundant Components HDD, PSU & Fan modules, LCD panel (16 bay only)
Hot Swap Components HDD, PSU & Fan modules, LCD panel (16 bay only)
Management RS-232, Web-browser and SNMP
Alerts Audible alarm, LEDs, RS-232,
Web-browser, Email and SNMP traps
I/O connectors Two SFF sockets for SFP Modules
1x SAS expansion port (SFF8088 miniSAS)
1x RJ11 type Debug port
1x RJ11 type RS-232 port
1 RJ45 type Ethernet port
Power Requirements & Certifications 110/240 VAC, 60/50 Hz. Auto sensing.
Dual independent 560 watt power supplies.
FCC Class-A & CE compliant
TUV, UL1950, CSA-950
OperatingTemperature 5ºC to 40ºC
Non-Operating Temperature -40ºC to 70ºC
Relative Humidity 10% to 85% non-condensing
Form Factor 3U, 19" Rackmount
Dimensions 483 (W) x 552 (D) x 3U (H) mm
Weight 25 KG (without disk drives)